新闻中心当前位置:首页-新闻中心
    c型钢对切割技术有什么要求?
    发布来源:http://affordabLe-Louisvuittonbags.com/  2019-7-12 13:44:49 发布人:济南坚固fun88安装

      在钢结构建筑中,C梁可作为檩条梁和墙梁。也可组合成轻质屋面框架、支架等建筑构件。无论何种用途,都会涉及到同样的问题,那就是切割c型钢。因为不同的切割方法有不同的切割效果,所以我们需要根据客户的要求选择合适的。

      In steel structure building, C beam can be used as purlin beam and wall beam. It can also be combined into light roof frame, bracket and other building components. No matter what use, the same problem will be involved, that is, cutting C-section steel. Because different cutting methods have different cutting effects, so we need to choose the right one according to the customer's requirements.

      一般C型钢在钢结构的应用中,其切割尽量选择在剪板机或锯床上进行,尤其适用于薄壁屋架。之所以推荐这样做,是因为在这里要准确,更简单的电锯方法作为合适的,不仅效率高,而且截面光滑光滑,质量好,切割误差很小。

      Generally, in the application of C-section steel in steel structure, the cutting of C-section steel should be carried out on the shear or sawing machine as far as possible, especially on the thin-walled roof truss. The reason why this method is recommended is that it is accurate and the simplest electric sawing method is suitable here. It is not only efficient, but also smooth and smooth in cross section, good in quality and small in cutting error.

      在不断努力降低产能和进一步降低供给预期的情况下,积极的需求无疑将进一步改善国内钢铁市场供需关系。国内c型钢市场库存加速下降,意味着前期低价资源已得到明显消化,c型钢市场资源成本逐步上升。今年,钢铁产能削减对产能的影响将明显大于去年,国内C型钢价格走势将形成更明显的提振。

    20121225090469996999.jpg

      With continuous efforts to reduce production capacity and further reduce supply expectations, positive demand will undoubtedly further improve the supply-demand relationship in the domestic iron and steel market. The accelerated decline of stock in the domestic C-section steel market means that the low-cost resources in the early stage have been obviously digested, and the cost of resources in the C-section steel market has gradually increased. This year, the impact of steel capacity reduction on production will be significantly greater than that of last year, and the domestic price trend of C-section steel will form a more obvious boost.

      当然,剖腹产钢也可以使用气割,但为了提高气割的质量,更好使用小直径的喷嘴,并在切割后用锤子轻轻敲打,使切口水平,满足各种用途的要求。

      Of course, gas cutting can also be used for caesarean section steel, but in order to improve the quality of gas cutting, it is better to use a small diameter nozzle, and tap lightly with a hammer after cutting, so that the level of incision can meet the requirements of various uses.

      以上内容由济南C型钢厂整理发布,更多的相关信息可以点击官网进行咨询:http://affordabLe-Louisvuittonbags.com

      More information can be consulted by clicking on the official website: http://affordabLe-Louisvuittonbags.com.