新闻中心当前位置:首页-新闻中心
    乐天堂棋牌正版在运输的时候要注意哪些?
    发布来源:http://affordabLe-Louisvuittonbags.com/  2019-6-3 18:38:08 发布人:济南坚固fun88安装

      乐天堂棋牌正版在运输过程中应注意的地方较多,首先是选择合适的运输车辆,应根据房间墙面标准尺寸的品种来选择合适的运输车辆类型。一般选用大型特种拖车运输。乐天堂棋牌正版墙板在装车时,应事先将机房墙板及附件按类型、品种等条件安装好,并要绑扎牢固、稳定,防止金属表面磨损或划伤。

      There are many points that should be paid attention to during the transportation of color steel plate. Firstly, the suitable transport vehicle should be selected, and the suitable type of transport vehicle should be selected according to the standard size of the room wall. Generally, large-scale special trailer is chosen for transportation. When loading the color steel plate wallboard, the machine room wallboard and accessories should be installed in advance according to the type, variety and other conditions, and should be tied firmly and stably to prevent metal surface wear or scratch.

      在运输的过程中,机器房间壁板应该坚决,坚决与汽车,和使用木楔和其他临时固定的方法来防止晃动造成身体的放松和揉捏变形现象,这也会使金属表面磨损或刮伤概率减少。在输送乐天堂棋牌正版材时,应注意输送板的高度不超过拖车的长度,并应相应地进行处理,防止倾覆。

      In the process of transportation, the wall of the machine room should be resolute and resolute with the car, and use wooden wedges and other temporary fixing methods to prevent the body from relaxing and kneading, which will also reduce the probability of metal surface wear or scratch. When transporting colored steel sheets, it should be noted that the height of the conveyor plate does not exceed the length of the trailer, and should be handled accordingly to prevent overturning.

    20121225085640354035.jpg

      机房墙板时系上汽车,选择角钢或角钢与平等的长度被放置在机房的两端的角落里墙板在顶层,以均匀分布的压力绳绑定和防止压力收敛和损害的边缘磨(凹)机房墙板。如长途运输或运输时路况不安全,要求金属面机房墙板选择水平放置方式。

      When the engine room wall is fastened to the car, angle steel or angle steel and equal length are selected to be placed in the corner at both ends of the engine room. The wall plate is on the top floor, which is bound by uniformly distributed pressure ropes and prevents pressure convergence and damage by grinding (concave) the edge of the engine room wall plate. If the road condition is unsafe during long-distance transportation or transportation, it is required that the wall panels of metal-faced machine room be placed horizontally.

      在机房内搬运专用墙面钢板时,钢墙板支点不应超过1.0米,以保证材料不变形、不磨损。如果有2米以上的fun88安装钢板,则挑出相应的钢板并绑在其尾部,防止fun88安装钢板因汽车尾部波浪冲击造成的大面积损坏。以上是乐天堂棋牌正版运输过程中的注意事项,我们一定要注意。

      When carrying special wall steel plate in the machine room, the fulcrum of the steel wall plate should not exceed 1.0 meters to ensure that the material does not deform and wear. If there are more than 2 meters of color steel plate, then pick out the corresponding steel plate and tie it to the tail to prevent large area damage caused by wave impact on the tail of the car. These are the precautions in the transportation of color steel plate, we must pay attention to them.